Janicke Machinery, Inc.

Call Us Today (815)965-0073

STRUCTURAL

STOP! Wasting time Drilling!
Use the economical way and punch it!
Work Smarter and Faster, NOT Harder!

Fact: Punches and dies last Thousands of holes longer than drills and ALL the holes are clean!
Fact: It takes much MORE time to drill a hole, than it does to punch it.
Fact: A CNC Beamline or Anglematic is MUCH more accurate than a hand held drill

CNC Machines

Completely
Re-furbished

For Angle punching.

Presses Of Various Sizes

Read More

press-large
Stop wasting time drilling! Use the economical way and punch it! Work smarter and faster... not harder.

  • Fact: Punches and dies last thousands of holes longer than drills and all of the holes are clean.
  • Fact: It takes much more time to drill a hole than it does to punch it.
  • Fact: A CNC Beamline or Anglematic is much more accurate than a handheld drill.

W.A.Whitney™ BEAMLINE

W.A.Whitney™ BEAMLINE

3 PRESS BEAMLINE COMING SOON

Parts And Manual Available

W.A.Whitney™ ANGLEMATIC

W.A.Whitney™ ANGLEMATIC

Parts and Manual Available

 

             845F (pics below) 



Anglematic-1Angle._ControlAngle._PUAnglematic-2

10 HP Power Unit

10 HP Power Unit

$3,750.00(Refurbished 80% new parts)


IMG_3730

10 HP Power Unit 1V. 450 Volts
Operating Pressure, Adjustable: 500 to 5500 PSI
Oil Flow Rate @ 5000 PSI (4.0) GPM
Reservoir Capacity: 10 Gallons
Valves: 1/4" Solenoid Controlled, Four Way Directional
Motor: 10 HP, 1800 RPM, 230/460 Volt, 60 Cycle, 215 T
Operating Controls: Pendent Push Buttons
Casters: 2 Rigid and 2 Swivel 5" Diameter
Weight: 660 Lbs.

Coper-Notch-Bender and Power Unit

Coper-Notch-Bender and Power Unit

$4,750.00

PARTS AVAILABLE

 


IMG_3681

610C
Tonnage: 18
Stroke Length (Full): 1-3/8"
Strokes per minute (Full): 12 w/3 HP
Operating Pressure: 1500 PSI
Weight (Less Power Unit): 450 Lbs.
Floor Space Required: 20" x 20"
Height: 30"
Standard (Maximum) Tooling Clearance: .015-.020
Hydraulic Hoses: 3/8" ID
Recommended Power Unit: 600-5-3A-6FS

coper_notch_work

790 Press

790-024 Press

$3350

790-024

 

790-024 Web Press: 90 Ton
Max Dia Hole: 1 1/4
Max Material Thickness: 1
Throat Depth: 4 1/4
Stroke: 1 3/8
Weight: 275 Lbs.
Punch Style: 770
Die Style 740
Recommended Power Unit: 700-S-10C
Cycle Time: 8.10

793-420 Press

793-420 - Beamline Web Press & Powerunit

$9,500 HAS NEW SEAL KIT INSTALLED

,793-420

 

790-024 Web Press: 100 Ton
Max Dia Hole: 1 1/2"
Max Material Thickness: 1 1/8'
Throat Depth: 30 1/2"
Stroke: 1 5/8
Weight: 10,000 Lbs.
Punch Style: 770-790
Die Style

740-790xx

Recommended Power Unit:

30 HP 230/460 Volts

Cycle Time: 20

791-020 Press

791-020 Press & Powerunit 

 SOLD

PARTS STILL AVAILABLE

791-020_-3

 

790-020 Web Press: 100 Ton
Max Dia Hole: 1 1/2
Max Material Thickness: 1 1/8
Throat Depth: 30 1/2"
Stroke: 1 5/8
Weight: 10000 Lbs.
Punch Style: 770-790xx
Die Style 740-790xx
Recommended Power Unit: 30 HP 230/460 Volts
Cycle Time: 20.00

750 Press

750 Press

$2150.00

751-000_2

                                        All Presses Have Been rebuilt

 

750-015 Web Press: 50 Ton
Max Dia Hole: 1 1/2
Max Material Thickness: 3/4
Throat Depth: 4 1/4
Stroke: 1 3/8
Weight: 200 Lbs.
Punch Style: 740
Die Style 740
Recommended Power Unit: 10
Cycle Time: 5.50

791 Press

791-AX-18 Press

$6500

791_AX-18c

 

 

790-024 Web Press: 90 Ton
Max Dia Hole: 1 1/2
Max Material Thickness: 1 1/8
Throat Depth: 18 1/2
Stroke: 1 5/8
Weight: 2000 Lbs.
Punch Style: 770-790xx
Die Style 740-790xx
Recommended Power Unit: 700-S-10C
Cycle Time: 9.00

731 Press

731 Press

$1,000.00

PARTS AVAILABLE



IMG_3679

Read more...

845D


845D

845D

SOLD

Parts AND MANUAL STILL Available

You are here: Structural