STOP! Wasting time Drilling!
Use the economical way and punch it!
Work Smarter and Faster, NOT Harder!
Fact: Punches and dies last Thousands of holes longer than drills and ALL the holes are clean!
Fact: It takes much MORE time to drill a hole, than it does to punch it.
Fact: A CNC Beamline or Anglematic is MUCH more accurate than a hand held drill
Stop wasting time drilling! Use the economical way and punch it! Work smarter and faster... not harder.
SOLD |
Parts Available |
| 10 HP Power Unit | 1V. 450 Volts |
| Operating Pressure, Adjustable: | 500 to 5500 PSI |
| Oil Flow Rate @ 5000 PSI | (4.0) GPM |
| Reservoir Capacity: | 10 Gallons |
| Valves: | 1/4" Solenoid Controlled, Four Way Directional |
| Motor: | 10 HP, 1800 RPM, 230/460 Volt, 60 Cycle, 215 T |
| Operating Controls: | Pendent Push Buttons |
| Casters: | 2 Rigid and 2 Swivel 5" Diameter |
| Weight: | 660 Lbs. |
| 610C | |
| Tonnage: | 18 |
| Stroke Length (Full): | 1-3/8" |
| Strokes per minute (Full): | 12 w/3 HP |
| Operating Pressure: | 1500 PSI |
| Weight (Less Power Unit): | 450 Lbs. |
| Floor Space Required: | 20" x 20" |
| Height: | 30" |
| Standard (Maximum) Tooling Clearance: | .015-.020 |
| Hydraulic Hoses: | 3/8" ID |
| Recommended Power Unit: | 600-5-3A-6FS |
| 750-015 Web Press: | 50 Ton |
| Max Dia Hole: | 1 1/2 |
| Max Material Thickness: | 3/4 |
| Throat Depth: | 4 1/4 |
| Stroke: | 1 3/8 |
| Weight: | 200 Lbs. |
| Punch Style: | 740 |
| Die Style | 740 |
| Recommended Power Unit: | 10 |
| Cycle Time: | 5.50 |
| 790-024 Web Press: | 90 Ton |
| Max Dia Hole: | 1 1/4 |
| Max Material Thickness: | 1 |
| Throat Depth: | 4 1/4 |
| Stroke: | 1 3/8 |
| Weight: | 275 Lbs. |
| Punch Style: | 770 |
| Die Style | 740 |
| Recommended Power Unit: | 700-S-10C |
| Cycle Time: | 8.10 |
| 790-024 Web Press: | 90 Ton |
| Max Dia Hole: | 1 1/2 |
| Max Material Thickness: | 1 1/8 |
| Throat Depth: | 18 1/2 |
| Stroke: | 1 5/8 |
| Weight: | 2000 Lbs. |
| Punch Style: | 770-790xx |
| Die Style | 740-790xx |
| Recommended Power Unit: | 700-S-10C |
| Cycle Time: | 9.00 |
| 790-024 Web Press: | 100 Ton |
| Max Dia Hole: | 1 1/2" |
| Max Material Thickness: | 1 1/8' |
| Throat Depth: | 30 1/2" |
| Stroke: | 1 5/8 |
| Weight: | 10,000 Lbs. |
| Punch Style: | 770-790 |
| Die Style |
740-790xx |
| Recommended Power Unit: |
30 HP 230/460 Volts |
| Cycle Time: | 20 |
| 790-020 Web Press: | 100 Ton |
| Max Dia Hole: | 1 1/2 |
| Max Material Thickness: | 1 1/8 |
| Throat Depth: | 30 1/2" |
| Stroke: | 1 5/8 |
| Weight: | 10000 Lbs. |
| Punch Style: | 770-790xx |
| Die Style | 740-790xx |
| Recommended Power Unit: | 30 HP 230/460 Volts |
| Cycle Time: | 20.00 |
